As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This sungoldpower 10pcs 560w bifacial solar review looks at a set of panels designed for high-output installations. Each panel in this pack delivers a rated 560W with a system voltage of 48V. The design uses N-Type 16BB cells to maximize current flow and reduce energy loss. Bifacial technology allows the modules to capture sunlight from both sides, potentially adding up to 30% extra power depending on your mounting surface and angle. These units measure 89.8 inches in length and weigh 70.4 pounds each. You get a complete set for building larger residential or off-grid arrays.
- Bifacial N-Type cells capture light from both sides for up to 30% extra energy gain
- 560W rated wattage per panel with a 48V system voltage for efficient string configuration
- 16BB monocrystalline half-cut cell design improves performance under partial shading conditions
- IP68 rating ensures protection against dust and water ingress for outdoor durability
- 30-year linear power warranty guarantees long-term stable energy production for your system
Good fit for
This kit suits homeowners and off-grid builders who need substantial power in a single purchase. The 48V system voltage works well with standard inverters for residential setups. Ground mounts or reflective roof surfaces will help you realize the bifacial benefit. It also fits RV owners or farmers who want a robust, long-warranty solution. If you are planning a large-scale solar installation and value high efficiency per panel, this pack provides a solid foundation for your energy independence goals.
Who can skip it
You should look elsewhere if you have limited roof space or need portable power. These panels are large, measuring nearly eight feet long, and heavy at over 70 pounds each. They are not designed for small RV roofs or portable solar carts. If you require flexible or thin-film panels for curved surfaces, this rigid glass unit will not fit. Additionally, if you need a smaller starter kit for a tiny home or cabin, buying a ten-pack may exceed your immediate energy needs and budget constraints.
Verdict
The SUNGOLDPOWER 10PCS 560W Bifacial Solar Panel is a high-capacity option for fixed installations where space allows. Its bifacial design and robust warranty make it a strong choice for serious off-grid or residential solar projects.
Key specs for this solar panel pack
Rated Wattage: 560W
This value indicates the maximum power each panel produces under standard test conditions. You get 560W per panel, totaling 5,600W for the ten-panel pack. Higher wattage means fewer panels are needed to reach your energy goals. This suits buyers who want compact arrays for roofs or ground mounts. Compare this against lower-wattage panels if space is limited.
Cell Type: N-Type 16BB, PERC Half-Cut
N-Type cells offer better durability and lower degradation over time compared to older P-Type options. The 16BB design improves current flow, while half-cut cells reduce resistance and heat. This combination helps maintain efficiency in partial shade. You benefit from longer lifespan and better performance in hot climates. Look for this tech when comparing high-efficiency solar options.
System Voltage: 48V
This voltage level is standard for many off-grid and residential solar setups. It allows you to connect these panels to compatible charge controllers and batteries efficiently. A 48V system reduces current for the same power, lowering wire losses. This suits users with existing 48V infrastructure. Check your inverter and battery requirements before buying to ensure compatibility with your existing gear.
Weight: 70.4 lbs
Each panel weighs 70.4 pounds, making them heavy to handle alone. You will likely need two people for safe installation. This weight suggests robust construction but requires strong mounting structures. Compare this with lighter panels if you plan to move them often. Ensure your roof or ground mount can support this load safely over time.
Design: Bifacial
Bifacial panels capture sunlight from both the front and the back side. This feature can generate up to 30% extra power depending on installation height and surface reflectivity. You benefit from higher energy yield in open areas with reflective ground. This suits ground mounts or elevated roof installations. Compare this with standard monofacial panels if maximizing output per square foot is your priority.
Design and build details
According to the listing, the SUNGOLDPOWER SG560WBG measures 89.8 inches in length and 44.6 inches in width. Each panel is 1.4 inches thick and weighs 70.4 pounds. The black finish and bifacial design allow light capture from both sides. This dual-sided structure can generate up to 30% extra power if reflected light hits the rear cells. The total peak power per panel reaches about 728W under ideal conditions. You need to account for this weight when planning your mounting structure. The 48V system voltage aligns with standard off-grid and residential setups. The IP68 rating suggests strong protection against dust and water immersion. This makes the panels suitable for outdoor exposure in various weather conditions. You can install these on roofs, ground mounts, or RVs without complex angle calculations. The 16BB monocrystalline cell layout enhances durability and improves performance in partial shading. This multi-busbar design reduces energy loss and supports better current flow. The half-cut cell technology further contributes to the panel's resilience. You get a 12-year material and workmanship warranty alongside a 30-year linear power warranty. These warranties indicate a focus on long-term reliability for your energy system. The panels are intended for home, RV, and off-grid use. They also fit boats, marine applications, trailers, and farms. The straightforward design prioritizes function over complex features. You do not need to manage internal controls or displays. The build supports flexible installation angles to match your site's specific geometry. This adaptability helps you maximize energy production regardless of your location.
Setup and daily operation
Setup begins with mounting the panels. The listing notes flexible angle installation, meaning you can tilt them without complex calculations. This suits ground mounts, roof mounts, RV setups, and off-grid systems. Each panel weighs 70.4 pounds and measures 89.8 by 44.6 inches. Handling ten of these requires careful planning for weight and space. The 1.4-inch thickness adds minimal profile but contributes to the overall load.
Daily use relies on the 48V system voltage. This voltage level is standard for many residential and commercial battery banks. It allows efficient charging of energy storage units. The bifacial design captures light from both sides, potentially adding up to 30% extra power. This gain depends on surface reflectivity and installation height. Ground-mounted panels on light-colored surfaces often see the biggest boost.
The N-Type 16BB cells improve current flow and reduce energy loss. This technology helps maintain performance in partial shading. You get stable output even if some panels are partially covered. The IP68 rating suggests strong protection against dust and water immersion. This makes the panels durable for outdoor exposure in various weather conditions.
Warranty coverage includes a 30-year linear power output guarantee and a 12-year material warranty. This long-term support indicates reliability for permanent installations. The panels are intended for home, RV, and off-grid use. They also fit boats, marine applications, trailers, and farms. You can integrate them into existing 48V solar arrays or build a new system from scratch.
Before you buy this solar pack
You need to check your inverter compatibility before ordering. This pack uses a 48V system voltage. Most standard portable power stations do not accept 48V input directly. You likely need a hybrid inverter or a charge controller that matches these specs. The panels are heavy at 70.4 pounds each. You will need sturdy mounting hardware for roof or ground installation. The bifacial design requires space behind the panels for reflected light. If you mount them flush against a surface, you lose the extra power gain. Cleaning is simple. Dust and debris block light. Wipe the glass periodically with water. This product belongs in the solar accessories category, not with portable power stations. It generates power but does not store it. Pair it with a compatible battery bank for off-grid use.
Check before you buy
- Verify your inverter supports 48V input voltage
- Ensure you have mounting hardware for 70-pound panels
- Confirm space exists behind panels for bifacial gain
- Check if your portable power station accepts this output
SUNGOLDPOWER 560W Bifacial Solar Panel
Best for: off-grid and marine 48V systems
- Rated Wattage
- 560W
- Cell Type
- N-Type 16BB, PERC Half-Cut
- System Voltage
- 48V
- Weight
- 70.4 lbs
- Intended Use
- Home, RV, Off-Grid
- Recommended Use
- Off-Grid Systems, Boats & Marine, Trailers, Farms
This 10-pack of 560W bifacial solar panels uses N-Type 16BB PERC half-cut cells to capture light from both sides. Each panel weighs 70.4 lbs and measures 89.8 by 44.6 inches. The design supports 48V systems and offers up to 30% extra power generation. It suits off-grid homes, RVs, and marine applications needing durable, high-output solar arrays.
- Bifacial design captures up to 30% extra power from rear light absorption
- N-Type 16BB PERC half-cut cells reduce energy loss and improve shading performance
- IP68 rating ensures weather resistance for outdoor installation
- 30-year linear power warranty guarantees long-term reliability
- Each panel weighs 70.4 lbs, requiring sturdy mounting hardware
- Dimensions of 89.8 by 44.6 inches demand significant roof or ground space
- Rated at 560W, which is lower than the 590W bifacial option available in variations
- You need high-efficiency N-Type cells for maximum energy harvest
- You are installing a 48V off-grid or marine solar system
- You have ample space for large 89.8-inch panels
- You prefer lighter panels under 70 lbs for easier handling
- You require smaller dimensions to fit compact RV roofs
- You want the highest wattage per panel available in this line
Verdict: SUNGOLDPOWER 560W Bifacial Solar Panel is a solid choice for off-grid and marine users who prioritize durability and rear-side energy capture. It fits those with the space and mounting strength to handle its 70.4 lb weight and large footprint.
Specifications side by side
| Spec | SUNGOLDPOWER 560W Bifacial Solar Panel |
|---|---|
| Rated Wattage | 560W |
| Cell Type | N-Type 16BB, PERC Half-Cut |
| System Voltage | 48V |
| Weight | 70.4 lbs |
| Intended Use | Home, RV, Off-Grid |
| Voltage | 48V |
| Recommended Use | Off-Grid Systems, Boats & Marine, Trailers, Farms |
| Design | Bifacial |
| IP Rating | IP68 |
| Dimensions | 89.8 × 44.6 × 1.4 inches |
| Size | 560W |
| Color | Black |
| Model | SG560WBG-10-SGP |
Frequently asked questions
What is the total wattage of this 10-panel pack?
The entire set produces 5,600W. Each individual panel is rated at 560W. Multiplying the single panel output by the ten included units gives you the total system capacity. This high output supports larger off-grid energy needs.
How heavy is each solar panel?
Each panel weighs 70.4 pounds. This substantial weight requires sturdy mounting structures. You must ensure your roof, ground mount, or trailer can support this load safely. The bifacial design does not reduce the physical mass of the unit.
Does this panel work for marine applications?
Yes, it is recommended for boats and marine use. The listing explicitly includes marine environments in its intended use cases. The 48V system voltage aligns with many boat electrical systems. The IP68 rating also helps withstand harsh coastal conditions.
What voltage system does this solar panel require?
It operates on a 48V system. You need compatible inverters or charge controllers that accept 48V input. Standard portable power stations often do not support this voltage directly. Verify your existing electrical infrastructure matches this requirement before installation.
What are the physical dimensions of the panel?
Each unit measures 89.8 inches in length and 44.6 inches in width. The thickness is 1.4 inches. These large dimensions require significant space for installation. Plan your mounting area carefully to accommodate the full footprint of each panel.
Is the cell type efficient for low light?
The panel uses N-Type cells. This technology generally offers better performance in varying light conditions compared to older types. The bifacial design also captures light from the rear side. This dual capture can boost energy production on reflective surfaces.
What IP rating does the panel have?
It has an IP68 rating. This indicates complete protection against dust ingress. It is also protected against continuous immersion in water. This high rating makes it suitable for outdoor environments where exposure to rain and dirt is common.
Can you adjust the angle of installation?
Yes, the listing notes flexible angle installation. You can tilt the panels without complex calculations. This allows you to optimize sun exposure for your specific location. It works well for ground mounts, roof setups, and RV applications.
