As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This rippleon level 2 ev charger review covers a hardwired charging solution designed for home garages. It delivers 48 amps at 240 volts, producing 11.5 kilowatts of power. This output allows for significantly faster charging compared to standard level one options. The unit connects via a 25-foot cable with a J1772 connector, ensuring compatibility with most electric vehicles. It mounts directly to your wall, eliminating the need for a plug. This setup is ideal for homeowners who want a permanent, high-power charging station.
- 48-amp hardwired connection for 11.5 kW output
- 25-foot J1772 cable for wide EV compatibility
- UL, ETL, and FCC safety certifications
- IP65 rating for indoor and outdoor use
- Wi-Fi connectivity for app-based scheduling
Good fit for
You should consider this charger if you own a home with a 240-volt circuit and want to avoid the power limitations of standard outlets. The 48-amp rating suits drivers who commute daily and need to replenish range quickly. The hardwired design is best for permanent installations in garages or covered driveways. If you value smart features like off-peak scheduling via Wi-Fi, this unit aligns with your needs. It is also suitable for households with multiple electric vehicles that share a single charging point.
Who can skip it
You should look at another option if you rent your home or need a portable charging solution. This unit is hardwired, meaning you cannot simply unplug it and move it. Renters often require NEMA 14-50 plug models for flexibility. If you have a 120-volt outlet only, this charger will not work without significant electrical upgrades. Additionally, if you prefer a plug-and-play setup without professional electrician installation, this hardwired model is not the right choice for your situation.
Verdict
This hardwired charger offers strong 11.5 kW output for homeowners with 240-volt circuits. It combines high speed with smart connectivity for reliable daily use.
RIPPLEON 48A Charger Key Specs
Amperage: 48A
This amperage rating indicates the electrical current the charger can deliver to your vehicle. Higher amperage generally translates to faster charging speeds compared to lower-rated units. You will benefit from this specification if you need to replenish your battery quickly between daily commutes. When comparing portable power stations, you should look for similar high-current outputs to ensure they can handle your device loads efficiently.
Power Output: 11.5kW
The power output determines how much energy is transferred per hour. An 11.5kW output is substantial for home charging, allowing you to add significant range in a short time. This spec is crucial for electric vehicle owners who prioritize speed. When evaluating portable generators, compare this wattage to their continuous output to understand how much equipment they can realistically power without overloading the system.
Voltage: 240V
This voltage requirement means the charger must be connected to a dedicated 240-volt circuit, typically found in home garages. It is not compatible with standard 120-volt household outlets. You need a professional electrician to install the correct wiring for this specification. When shopping for portable power stations, check if they support high-voltage outputs or require specific inverters to match this level of power delivery.
Cable Length: 25ft
A 25-foot cable provides flexibility in where you park your vehicle relative to the charging unit. You do not need to stretch the cable across driveways or leave the port exposed to weather. This length is practical for most residential garages. When considering portable power stations, compare the length of their output cords to ensure they reach your intended usage location without extension cords.
Design and Build Overview
The listing describes the unit as a hardwired Level 2 charger with a Mist Silver finish. You can also find it in Lunar Pearl. The physical dimensions are 11.9 inches wide, 4.09 inches long, and 2.95 inches high. It weighs 20 pounds. This mass suggests a solid internal construction, which helps with stability during use. The compact footprint allows for wall mounting in tight garage spaces without protruding excessively into your driveway.
According to the listing, the device features a 25-foot cable. This length provides flexibility for parking your vehicle at various angles. The plug end is designed to endure over 10,000 charges, indicating durable materials for repeated connection and disconnection. The body itself is rated IP65, meaning it is dust-tight and protected against water jets. This rating allows you to install the charger outdoors without concern for rain or snow damage.
The control interface includes Wi-Fi connectivity for smart monitoring. You can schedule charging sessions or monitor energy usage via an app. The unit also supports RFID cards for secure access control. These features mean you can manage charging costs and vehicle access remotely. The hardwired connection eliminates the need for a NEMA 14-50 plug, offering a cleaner look and potentially higher safety standards for permanent installation. The design prioritizes both durability and smart functionality for daily home use.
Installation and Daily Operation
Setup requires professional electrical work because this unit is hardwired. You must connect it directly to a 240-volt circuit. The listing advises consulting a licensed electrician before beginning installation. This method ensures a secure connection for the 48-amp current. The unit mounts to a wall, saving floor space. The 25-foot cable provides reach for most parking spots. You can place the charger indoors or outdoors due to its IP65 rating. Daily use is straightforward. The connector is J1772, which fits all electric and plug-in hybrid vehicles in North America. Tesla owners can use the included NACS adapter. You can start charging immediately by plugging in. Alternatively, you can use the RFID card or the companion app. The app connects via Wi-Fi. This feature lets you monitor energy use and schedule sessions. You can set charging times to align with off-peak electricity rates. The system also supports over-the-air updates through the app. This keeps the software current without physical access. The charger includes built-in battery protection to help maintain your vehicle’s health. The 25-foot cable is designed to endure frequent plugging and unplugging. The plug end is drop-resistant. You simply mount the unit, connect the power, and plug into your car. The smart features allow you to manage when and how much energy you draw. This helps you avoid high demand charges. The process is fully automated once configured. You do not need to hold the connector or manage the charge manually.
Before You Buy This Charger
You need a professional electrician to install this hardwired unit. It connects directly to a 240-volt circuit. Do not attempt DIY wiring. The charger includes a J1772 connector. You must verify your vehicle supports this standard. Tesla owners need the included NACS adapter for compatibility. Keep the 25-foot cable clear of debris. The IP65 rating allows outdoor use, but ensure the mounting area is protected from direct water jets. You should check your home’s electrical panel capacity. A 48-amp draw requires a dedicated breaker. This device fits into the broader 1 options on EvenRate as a stationary home solution. Unlike portable power stations or generators, it relies on your grid. It does not provide backup energy during outages. Plan your garage layout to accommodate the wall mount. Ensure the cable reaches your parking spot comfortably. Regularly inspect the plug end for wear. The drop-resistant design helps, but care extends its life.
Check before you buy
- Hire a licensed electrician for hardwired installation
- Confirm your EV accepts J1772 or NACS
- Verify your panel supports a 48-amp dedicated circuit
- Ensure the 25-foot cable reaches your parking spot
RIPPLEON 48A Hardwired Level 2 EV Charger
Best for: homeowners needing hardwired 48A fast charging
- Connector Type
- J1772, NACS
- Charging Level
- Level 2
- Amperage
- 48A
- Power Output
- 11.5kW
- Power Plug
- Hardwired
- Voltage
- 240V
This Rippleon Level 2 EV Charger delivers 11.5kW of power at 48 amps and 240V. It features a 25ft cable and hardwired installation for homeowners. The unit includes Wi-Fi connectivity for app scheduling and supports J1772 and NACS adapters. It is ideal for users who want faster charging speeds and smart energy management for their electric vehicles.
- Delivers 11.5kW power output at 48 amps for rapid charging.
- Includes a 25ft cable for flexible indoor and outdoor placement.
- Features Wi-Fi connectivity for app-based scheduling and monitoring.
- Supports both J1772 and NACS connectors for universal compatibility.
- Requires hardwired installation, which is less flexible for renters.
- Weighs 20 pounds, making it heavier than plug-in models.
- Limited to 240V input, restricting use on standard outlets.
- You own a home and can hire an electrician for hardwiring.
- You need a 25ft cable to reach your vehicle from the wall.
- You want to schedule charging via an app to save on electricity.
- You rent and cannot modify your electrical wiring.
- You prefer a plug-in model that uses a NEMA 14-50 outlet.
- You need a lighter unit for easy portability.
Verdict: RIPPLEON 48A Hardwired Level 2 EV Charger fits homeowners who want high-speed 11.5kW charging and smart app control. It suits users who have a dedicated circuit and value a long 25ft cable for convenient access.
Specifications side by side
| Spec | RIPPLEON 48A Hardwired Level 2 EV Charger |
|---|---|
| Connector Type | J1772, NACS |
| Charging Level | Level 2 |
| Amperage | 48A |
| Power Output | 11.5kW |
| Power Plug | Hardwired |
| Voltage | 240V |
| Cable Length | 25ft |
| Dimensions | 4.09 × 11.9 × 2.95 inches |
| Weight | 20 pounds |
| Size | Hardwired |
| Color | Mist Silver |
| Model | ROC00#* |
Frequently asked questions
What is the maximum charging speed of the RIPPLEON Level 2 EV Charger?
This unit delivers up to 48 amps of current. Operating at 240 volts, it produces 11.5 kilowatts of power. This high output allows for significantly faster charging compared to standard Level 1 options. You will see reduced charging times for most electric vehicles when using this capacity.
Does the RIPPLEON charger come with a power cord?
No, this model is hardwired. It does not include a plug or a detachable cable for standard outlets. You must connect the unit directly to a dedicated 240-volt electrical circuit. This installation method ensures a secure connection for the high 48-amp current it supports.
How large is the RIPPLEON 48A EV charger?
The physical dimensions are 11.9 inches wide, 4.09 inches long, and 2.95 inches high. The unit weighs 20 pounds. These measurements help you determine if it fits in your garage or parking area. The Mist Silver finish is one of the available color options.
Is professional installation required for this Level 2 charger?
Yes, professional installation is necessary. Because the unit is hardwired, you cannot simply plug it into a wall outlet. You must connect it directly to a 240-volt circuit. The listing advises consulting a licensed electrician to ensure the wiring handles the 48-amp load safely.
What type of connector does the RIPPLEON charger use?
The charger includes a J1772 connector. This is the standard connector for most electric vehicles sold in the United States. You must verify that your vehicle supports this standard. Tesla owners typically need an adapter to use this connector with their vehicles.
Who is the best user for this hardwired charger?
This charger fits homeowners who want high-speed 11.5kW charging. It suits users who have a dedicated 240-volt circuit already installed. You will benefit if you value a secure hardwired connection over a portable plug. It is ideal for daily home charging routines.
