As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing GROWATT vs renogy power inverter options, you face two distinct approaches to energy conversion. Both devices deliver pure sine wave output, ensuring clean power for sensitive electronics. The primary difference lies in scale and application. One system targets whole-home or commercial backup with high capacity, while the other focuses on portable, off-grid use for smaller loads. Your choice depends entirely on your voltage requirements and total wattage needs.
Continuous Wattage
10,000W
2,000W
DC Input Voltage
48V
12V
AC Output Voltage
120/240V split-phase or 120/208V three-phase
110V/120VAC
Weight
108 pounds
11.7 pounds
Remote Control
App, web, WiFi, Ethernet
16.4ft wired remote
Choose the first if
- You need to power an entire home or commercial facility with high-wattage appliances.
- You have a 48V battery bank and require split-phase or three-phase output.
- You want remote monitoring via WiFi or Ethernet without running long cables.
Choose the second if
- You are powering small electronics, lights, or RV appliances in an off-grid setup.
- You are working with a standard 12V deep cycle battery system.
- You need a lightweight, compact unit that is easy to move and install.
Verdict
The GROWATT inverter is the right choice for large-scale residential or commercial systems requiring high power and advanced grid integration. The Renogy inverter suits smaller, portable applications where low voltage and light weight are priorities. Select the model that matches your battery voltage and total wattage demands.
GROWATT vs Renogy Inverter Comparison
Power output
Edge: GROWATT 10kW Hybrid Solar Inverter
The GROWATT 10000W Hybrid Solar Inverter delivers 10,000W of continuous pure sine wave power. This high output supports split-phase 120/240V or three-phase 120/208V systems. It is designed for whole-home backup and commercial applications. The Renogy P2 2000W Pure Sine Wave Inverter provides 2,000W continuous output. It peaks at 4,000W for surge loads. This unit outputs 110V to 120VAC. It is suited for smaller off-grid setups. The GROWATT offers five times the continuous wattage. This makes it the clear choice for high-demand environments. The Renogy is better for lightweight, low-power needs.
Input voltage
Edge: GROWATT 10kW Hybrid Solar Inverter
The GROWATT inverter operates on a 48V DC input. This higher voltage system reduces current flow and allows for thinner wiring over longer distances. It supports up to 15,000W of solar input via three MPPTs. The Renogy P2 uses a 12V DC input. This lower voltage requires thicker cables, such as the included 1/0AWG cables, to handle the current safely. The GROWATT is ideal for large solar arrays and battery banks. The Renogy fits standard 12V battery systems in RVs or small cabins. Your choice depends on your existing battery voltage. Higher voltage systems are more efficient for larger power loads.
Remote control
Edge: GROWATT 10kW Hybrid Solar Inverter
The GROWATT inverter offers extensive remote control options. You can monitor and manage the system via a dedicated app, web interface, WiFi, or Ethernet connection. It also supports optional cellular connectivity. The Renogy P2 includes a 16.4ft wired remote control. This physical controller allows for manual operation without needing network connectivity. The GROWATT provides real-time data and smart energy management features. The Renogy’s wired remote is simple and reliable. It does not require internet access. If you need detailed monitoring and remote adjustments, the GROWATT is superior. For basic manual control, the Renogy suffices.
Portability
Edge: Renogy P2 2000W Pure Sine Wave Inverter
The Renogy P2 is significantly more portable. It weighs only 11.7 pounds and measures 4 inches in height. Its compact size makes it easy to install in tight spaces like RVs or trucks. The GROWATT inverter is much heavier and larger. It weighs 108 pounds and stands 28.3 inches tall. Its dimensions are 17.3 inches by 9.43 inches. This unit is designed for permanent wall mounting in homes or commercial buildings. It is not intended for frequent movement. If you need a lightweight, movable inverter, the Renogy is the better option. For stationary, high-power installations, the GROWATT is appropriate.
Battery compatibility
Edge: GROWATT 10kW Hybrid Solar Inverter
The GROWATT inverter supports a wide range of battery types. It works with 48V lithium, lead-acid, AGM, sealed, gel, and flooded batteries. It allows up to 200A charge and discharge current. It also features dual battery ports for flexible expansion. The Renogy P2 requires a deep cycle battery with at least 80% discharge depth. It does not specify multiple battery types or communication protocols in the data. The GROWATT offers more flexibility for system design. You can scale your battery bank up to 40kWh with compatible units. The Renogy is limited to standard 12V deep cycle batteries.
Choose the right inverter for your needs
Homeowners needing whole-home backup power
Our pick: GROWATT 10kW Hybrid Solar Inverter
You need 10,000W of continuous split-phase power to run major appliances. This unit offers 120/240V output and fast backup transfer under 10 ms. It supports up to 15,000W of solar input across three MPPTs. The IP65 enclosure allows reliable outdoor installation. You also get remote monitoring via app or web for real-time system control.
RV owners with simple 12V DC systems
Our pick: Renogy P2 2000W Pure Sine Wave Inverter
This inverter converts 12V DC to 120V AC with 2,000W continuous output. It is lightweight at 11.7 pounds, making it easy to mount in tight spaces. The package includes a 16.4ft wired remote for convenient operation. You get three AC outlets and a USB port for charging devices. Its compact size fits standard RV electrical setups.
Users building scalable off-grid solar systems
Our pick: GROWATT 10kW Hybrid Solar Inverter
You can connect up to six units in parallel for 60kW total capacity. The inverter supports both grid-tied and off-grid modes with flexible battery options. It accepts 48V lithium or lead-acid batteries with up to 200A charge/discharge. Dual AC inputs allow grid or generator support. Smart energy management optimizes solar usage and reduces reliance on external power sources.
Buyers wanting plug-and-play simplicity
Our pick: Renogy P2 2000W Pure Sine Wave Inverter
You receive two 1/0AWG cables and a wired remote for quick setup. The pure sine wave output protects sensitive electronics like laptops and TVs. Conversion efficiency exceeds 90%, reducing energy loss. The unit operates quietly without buzzing sounds. You do not need complex configuration or additional communication modules to start using it immediately.
GROWATT 10kW Hybrid Solar Inverter
Best for: whole-home backup and scalable solar systems
- Continuous Wattage
- 10000W
- Waveform
- Pure Sine Wave
- DC Input Voltage
- 48V
- AC Output Voltage
- 120/240V, 120/208V
- Remote Control
- App, web, WiFi, Ethernet
- Intended Use
- Home, Off-Grid
The GROWATT 10000W inverter delivers 10kW of continuous pure sine wave power at 120/240V split-phase. It accepts up to 15kW of solar input across three MPPTs and supports 48V battery systems. This unit scales to 60kW when paralleled. It suits homeowners needing whole-home backup or commercial users requiring scalable, grid-tied energy management with remote app control.
- 10kW continuous output with <3% THD for clean power
- 15kW solar input capacity via 3 MPPT trackers
- Scalable to 60kW by connecting up to 6 units
- Fast <10 ms backup transfer time for seamless switching
- IP65-rated enclosure for reliable indoor and outdoor use
- Heavy at 108 pounds, making installation more difficult
- Large footprint at 28.3 inches tall and 17.3 inches long
- Limited to 48V DC input, restricting battery compatibility
- You need 10kW of continuous power for whole-home backup
- You plan to scale your system by paralleling multiple units
- You want remote monitoring via WiFi or Ethernet app
- You have a 12V or 24V battery system
- You cannot support a 108-pound wall-mounted unit
- You only need small-scale power for camping or RVs
Verdict: The GROWATT 10000W Hybrid Solar Inverter fits users who need high-capacity, scalable power for residential or commercial sites. Its robust 10kW output and 15kW solar input handle demanding loads, while its heavy build requires sturdy mounting.
Renogy P2 2000W Pure Sine Wave Inverter
Best for: 12V off-grid electronics and small appliances
- Continuous Wattage
- 2000W
- Surge Wattage
- 4000W
- Waveform
- Pure Sine Wave
- DC Input Voltage
- 12V DC
- AC Output Voltage
- 120V AC
- AC Outlets
- 3
This Renogy inverter converts 12V DC to 110V AC with 2000W continuous and 4000W surge power. It outputs a pure sine wave for sensitive electronics. The unit includes a 16.4ft wired remote and USB port. It weighs 11.7 pounds and measures 17.8 by 8.6 by 4 inches. You should use it in off-grid or RV systems with deep cycle batteries.
- 2000W continuous DC to AC power
- 4000W peak surge for load start-up
- Pure sine wave output protects electronics
- Includes 16.4ft wired remote control
- Built-in 5V/2.1A USB port
- 2000W continuous power is lower than the 10000W inverter on this list
- 12V DC input requires thicker cables than higher voltage systems
- 11.7 pound weight is heavier than smaller 1000W or 700W variants
- You need pure sine wave power for laptops and TVs
- You operate a 12V off-grid or RV system
- You want a wired remote for convenient operation
- You require more than 2000W of continuous power
- You need a 24V or 48V input system
- You want built-in battery management or ATS features
Verdict: Renogy 2000W 12V Pure Sine Inverter fits users needing reliable AC power for small electronics in 12V setups. It suits those who prioritize pure sine wave quality over high wattage capacity.
Specifications side by side
| Spec | GROWATT 10kW Hybrid Solar Inverter | Renogy P2 2000W Pure Sine Wave Inverter |
|---|---|---|
| Continuous Wattage | 10000W | 2000W |
| Surge Wattage | – | 4000W |
| Waveform | Pure Sine Wave | Pure Sine Wave |
| DC Input Voltage | 48V | 12V DC |
| AC Output Voltage | 120/240V, 120/208V | 120V AC |
| AC Outlets | – | 3 |
| Remote Control | App, web, WiFi, Ethernet | 16.4ft wired remote |
| Running Wattage | – | 4000W |
| Features | Pure Sine Wave | USB Ports, Remote Control, Pure Sine Wave |
| Intended Use | Home, Off-Grid | Home, RV, Off-Grid |
| Voltage | 120V/240V | 120V |
| Wattage | 10000W | 2000W |
| Recommended Use | Off-Grid Systems | Off-Grid Systems |
| Included Components | Inverter | Inverter |
| Power Plug | – | Hardwired |
| Application | – | Truck |
| Technology | MPPT | – |
| Dimensions | 17.3 × 9.43 × 28.3 inches | 17.8 × 8.6 × 4 inches |
| Weight | 108 pounds | 11.7 pounds |
| Size | 10000W | 2000W(No BT & ATS) |
| Color | White | Black |
| Model | SPH 10000TL-HU-US | RNG-INVT-2000-12V-P2 |
Frequently asked questions
Can I use a GROWATT inverter for my RV?
No. The GROWATT 10000W Hybrid Solar Inverter is designed for home and off-grid systems, not recreational vehicles. It weighs 108 pounds and measures 28.3 inches in height. This heavy build requires sturdy mounting. It is not portable or compact enough for typical RV use. You should look for smaller, lighter units instead.
Does the Renogy P2 inverter include a remote control?
Yes. The Renogy P2 2000W Pure Sine Wave Inverter includes a remote control. This feature allows you to monitor and operate the device from a distance. It also offers USB ports for charging small electronics. This makes it convenient for off-grid setups in homes, RVs, or trucks where direct access is difficult.
What is the difference between the output voltages of these two inverters?
The GROWATT inverter provides 120V/240V output, supporting split-phase systems for high-power appliances. The Renogy P2 inverter outputs 110V from a 12V input. This lower voltage setup is suitable for small electronics and lights. You must match your inverter choice to the voltage requirements of your specific electrical loads and battery bank.
Is the GROWATT inverter suitable for commercial applications?
Yes. The GROWATT 10000W Hybrid Solar Inverter is built for commercial sites and whole-home backup. Its 10kW output handles demanding loads. It supports up to 15kW of solar input. This high capacity and robust construction make it ideal for larger facilities that require scalable and reliable power conversion for critical systems.
How much space does the Renogy inverter take up?
The Renogy P2 2000W Pure Sine Wave Inverter is compact. It measures 17.8 inches in length, 8.6 inches in width, and 4 inches in height. Weighing only 11.7 pounds, it is easy to install in tight spaces. This small footprint makes it practical for RVs, trucks, and small off-grid homes.
Does the Renogy inverter require hardwiring?
Yes. The Renogy P2 2000W Pure Sine Wave Inverter uses a hardwired power plug. It does not feature a standard wall outlet. You must connect it directly to your battery bank via appropriate cables. This installation method ensures a secure connection for continuous power delivery in off-grid or mobile applications.
Can I run a microwave on the Renogy inverter?
It depends on the microwave's wattage. The Renogy P2 offers 2000W of continuous power. Most microwaves require 1000W to 1500W, so it can likely handle them. However, it is best for small electronics and light appliances. For heavy-duty kitchen tools, the GROWATT 10000W unit provides significantly more capacity.
