As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This dewalt portable level 2 ev review covers the DEWALT 32A Portable EV Charger. It delivers up to 32 amps and 7.6 kW of power. The unit supports both Level 1 and Level 2 charging modes. It features a 20-foot UL-certified cable for extended reach. The charger includes a NEMA 14-50 plug and a NEMA 5-15 adapter. This flexibility allows you to charge at various outlets. The device is CSA certified for indoor and outdoor use. It also carries an IP66 waterproof rating for weather resistance.
- Delivers up to 32 amps and 7.6 kW of power output
- Includes a 20-foot UL-certified cable for extended charging reach
- Comes with both NEMA 14-50 and NEMA 5-15 plug adapters
- Features IP66 waterproof rating and CSA certification for safety
- Built with a protective outer cage and anti-slip grip handle
Good fit for
This charger suits EV owners who need a reliable, portable solution for travel or homes without dedicated charging infrastructure. The 20-foot cable and included NEMA 5-15 adapter make it ideal for use in standard household outlets or 240V circuits. If you drive an SAE J1772 vehicle, this unit provides up to 24 miles of range per hour. The durable construction and weather resistance make it a practical choice for frequent travelers or those charging in varied environments.
Who can skip it
You should look elsewhere if you require a Tesla-specific connector without purchasing an additional adapter, as the SAE J1772 plug is standard but requires a separate Tesla adapter. If you need higher amperage for faster charging speeds, this 32-amp unit may be too slow for your needs. Additionally, if you prefer a hardwired, permanent installation over a plug-in portable unit, this device is not designed for that setup. The reliance on a plug-in design means you are limited by outlet availability.
Verdict
The DEWALT 32A Portable EV Charger offers robust, portable charging with strong safety certifications and flexible plug options. It is a solid choice for SAE J1772 owners needing a durable, travel-ready solution.
Key specs explained
Amperage: 32 A
This rating indicates the maximum current the charger can supply. At 32 amps, you get faster charging than standard 12-amp Level 1 units. This helps you add range more quickly when plugged into a 240V outlet. It suits drivers who need efficient home charging. Compare this to lower amperage portable stations that may charge devices slower. Higher amperage generally reduces wait times for electric vehicles.
Power Output: 7.6 kW
This is the total energy transfer rate per hour. Seven point six kilowatts allows you to add approximately 24 miles of range per hour of charging. This is significantly faster than basic Level 1 chargers. It benefits users with larger batteries who want to replenish energy quickly. When comparing portable power solutions, higher wattage means less downtime. This spec is critical for maximizing daily utility and convenience.
Voltage: 120-240V
This range means the unit works with standard household outlets and heavy-duty appliances. You can plug it into a 120V socket for slower charging or a 240V outlet for maximum speed. This flexibility allows use in various locations without specific wiring. It suits travelers who encounter different outlet types. Compare this to fixed chargers that only support one voltage. This dual capability offers greater adaptability for home and road use.
Cable Length: 20 ft
A twenty-foot cord provides substantial reach from the wall to your vehicle. You can park further away from the outlet, which is useful in tight garages. This length reduces strain on the plug and connector. It benefits users with limited parking space near charging points. Compare this to shorter cables that may require awkward positioning. Adequate cable length enhances convenience and reduces setup hassle during daily charging routines.
Connector Type: SAE J1772
This is the standard plug for most electric vehicles in North America. It ensures compatibility with nearly all non-Tesla EVs. You get a secure, universal connection without needing extra adapters for most cars. This suits owners of mainstream electric vehicles. Compare this to proprietary connectors that limit brand flexibility. The SAE J1772 standard guarantees broad usability across different manufacturers and models.
Design and build details
The listing describes a durable outer cage designed to shield the unit from wear and tear. This protective shell suggests the charger can handle rough handling during transport or storage. You get an anti-slip grip handle on the unit. This feature ensures a secure connection when you plug it in or move the device. The design prioritizes physical robustness for users who need a reliable tool in varied environments.
According to the listing, the device carries an IP66 waterproof rating. This specification means it is protected against powerful water jets and dust ingress. You can use the charger indoors or outdoors without worrying about rain or splashes. The CSA certification further indicates that the build meets specific safety standards for these conditions. This allows for flexible placement near garages, driveways, or outdoor charging stations.
The unit includes a travel bag to keep everything protected on the go. This accessory complements the 20-foot UL-certified cable, which offers extended reach. The combination of the long cable and the protective bag supports a portable setup. You can carry the charger easily while maintaining access to your vehicle from a distance. The layout supports straightforward plug-and-charge operation without hardwiring. This physical design makes it suitable for drivers who move between locations frequently.
Setup and Everyday Use Guide
Setting up this charger requires no tools or hardwiring. You simply plug the NEMA 14-50 connector into a compatible 240V outlet. If you only have a standard 120V outlet, you can use the included NEMA 5-15 adapter. This flexibility allows you to charge at home or on the road without installing new hardware. The 20-foot UL-certified cable provides enough reach to access most parking spots or driveways without straining the connection.
Daily use is straightforward. You connect the SAE J1772 plug to your electric vehicle. The unit supports both Level 1 and Level 2 charging modes. At 32 amps, it delivers up to 7.6 kW of power. This adds approximately 24 miles of range per hour of charging. The IP66 waterproof rating means you can leave it plugged in outside in rain or snow. The CSA certification confirms it meets safety standards for indoor and outdoor environments.
Protection features activate automatically. The charger monitors for overvoltage, overcurrent, overheating, and surge conditions. If any issue arises, the system shuts down to protect your vehicle. The protective outer cage shields the electronics from physical wear. The anti-slip handle makes it easy to carry and connect. When not in use, you can store the unit in the provided travel bag. This keeps the cable and adapter organized and protected from damage during transport.
Before You Buy This Charger
You should verify your vehicle’s charging port matches the SAE J1772 connector. If you drive a Tesla, the adapter is sold separately, so budget for that extra part. Check your home’s electrical panel to ensure the circuit can handle 32 amps without tripping breakers. The 20-foot cable offers good reach, but you may need an extension cord for distant garages. Store the unit in its travel bag to protect the outer cage and handle from dust or moisture when not in use. This charger sits alongside portable power stations and generators in your EV setup. Unlike generators, it draws no fuel and produces zero emissions. Unlike some power stations, it delivers higher continuous power for faster top-ups. Consider this device as a dedicated home and travel solution rather than a backup energy source. It complements portable stations by handling daily charging while those units cover emergency needs or off-grid scenarios.
Check before you buy
- Confirm your EV uses the SAE J1772 port.
- Verify your outlet supports 32 amps safely.
- Buy a Tesla adapter if you own a Tesla.
- Check if your garage layout fits the 20-foot cable.
DEWALT 32A Portable EV Charger
Best for: Portable Level 2 charging with 32 Amps
- Connector Type
- SAE J1772
- Charging Level
- Level 1 and Level 2
- Amperage
- 32 A
- Power Output
- 7.6 kW
- Power Plug
- NEMA 14-50, NEMA 5-15
- Voltage
- 120-240V
The DEWALT DXPAEV032-20 is a portable Level 1 and Level 2 EV charger delivering up to 32 Amps and 7.6 kW. It features a 20 ft UL-certified cable and a NEMA 14-50 plug with a NEMA 5-15 adapter. This unit provides up to 24 miles of range per hour. It is built for indoor and outdoor use with an IP66 waterproof rating. You will find this charger suitable for flexible charging needs on the go.
- Delivers up to 32 Amps and 7.6 kW of power
- Includes a 20 ft UL-certified cable for extended reach
- Features NEMA 14-50 plug with included NEMA 5-15 adapter
- IP66 waterproof rating for indoor and outdoor use
- Provides up to 24 miles of range per hour
- Maximum power output is 7.6 kW
- Cable length is limited to 20 ft
- You need a portable charger for travel or storage
- You require a NEMA 14-50 plug for faster charging
- You want a durable unit with a protective outer cage
- You require a fixed wall-mounted installation
- You need a cable length longer than 20 ft
- You prefer a charger with higher amperage than 32 Amps
Verdict: DEWALT 32A Portable EV Charger offers reliable 32 Amp charging with a 20 ft cable. It fits owners who need portable, weather-resistant charging for SAE J1772 vehicles.
Specifications side by side
| Spec | DEWALT 32A Portable EV Charger |
|---|---|
| Connector Type | SAE J1772 |
| Charging Level | Level 1 and Level 2 |
| Amperage | 32 A |
| Power Output | 7.6 kW |
| Power Plug | NEMA 14-50, NEMA 5-15 |
| Voltage | 120-240V |
| Cable Length | 20 ft |
| Intended Use | Outdoor |
| Size | Charger |
| Model | DXPAEV032-20 |
Frequently asked questions
Can I use the DEWALT 32A charger on a 120V outlet?
Yes, you can use it on a standard 120V outlet. The product data notes that an included NEMA 5-15 adapter allows this connection. This enables Level 1 charging in a pinch, though it will be much slower than the 32-amp Level 2 mode available on 240V circuits.
Is this charger weatherproof for outdoor storage?
The charger is intended for outdoor use. Its design includes a durable outer cage to shield the unit from wear and tear. This protective shell suggests it can handle rough handling and exposure, making it suitable for leaving outside or storing in a garage without extra housing.
How long is the charging cable on this unit?
The unit comes with a 20-foot cable. This length provides extended reach from your outlet to your vehicle. It helps you position the charger comfortably without needing extension cords or straining the connection point, which is useful for tighter parking spots or garages.
Does this model support both Level 1 and Level 2 charging?
Yes, it supports both charging levels. You can switch between Level 1 for standard outlets and Level 2 for faster 240V charging. This flexibility lets you charge anywhere, adapting to the power source available at your home, workplace, or travel destination without needing multiple devices.
What plug type does the main connector use?
The main connector is a NEMA 14-50 plug. This is the standard plug for high-power 240V outlets found in many homes. It draws up to 32 amps for rapid charging. You must have a compatible outlet installed to utilize the full speed and power of this charger.
Is the DEWALT 32A charger compatible with all EVs?
It works with any vehicle using the SAE J1772 connector. This is the standard port for most electric and plug-in hybrid cars. If you drive a Tesla, you will need a separate adapter to connect to this charger, as it is not included with the unit.
What is the maximum power output of this charger?
The maximum power output is 7.6 kW. This is derived from the 32-amp current at 240 volts. This rating ensures significantly faster charging times compared to standard Level 1 chargers. It is ideal for drivers who need to add range quickly during daily commutes or overnight charging.
