As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anker solix 800w alternator charger review highlights a device designed to recharge your power station while you drive. The unit delivers 800W of charging power and connects via Bluetooth and Wi-Fi for remote control. It claims to charge a 2kWh power station in just three hours, which is eight times faster than using a standard car auxiliary port. The device is compact, measuring 8.59 by 4.69 by 2.68 inches. It works with 99% of gas vehicles and RVs by automatically adjusting to your battery type. You get smart app control and flexible charging options in one small package.
- Charges a 2kWh power station to 100% in only 3 hours
- Up to 8× faster than standard car auxiliary port charging
- Connects via Bluetooth and Wi-Fi for remote app control
- Automatically adjusts to protect battery type in 99% of gas vehicles and RVs
- Compatible with expansion batteries for up to 12kWh extra capacity
Good fit for
You should consider this charger if you own an RV or gas vehicle and want to recharge your power station while driving. The 800W output and fast charging speed are ideal for long road trips where you need to minimize downtime. The smart app control lets you monitor and adjust settings from your phone without leaving the driver’s seat. It also suits users who plan to expand their system with additional batteries for higher capacity needs.
Who can skip it
You might want to look elsewhere if you need a standalone generator for heavy power loads. This device is an alternator charger, not a power source itself. It requires a compatible power station to store energy. If you do not have an Anker SOLIX power station, this unit will not work for you. It also lacks a display, so you must rely on your phone for status updates.
Verdict
This charger offers fast alternator-based recharging and smart remote control for compatible power stations. It is a practical add-on for RVers and travelers who drive frequently.
Key specs explained for this charger
Wattage: 800W
This value indicates the maximum power output the device can push into your connected battery or power station. You get faster replenishment compared to standard auxiliary ports, which often deliver much lower amperage. This higher rate helps recover energy quickly during short stops or while cruising, making it efficient for maintaining your energy reserves without long idle times.
Connectivity: Bluetooth, Wi-Fi
These features allow you to monitor and control the charger remotely using a smartphone app. You can start or stop charging sessions and adjust settings without leaving your seat. This remote access adds convenience for RV owners or drivers who want to manage power flow efficiently while on the move or parked in hard-to-reach locations.
Color: Black
The unit features a black finish, which is a common color for automotive accessories. This choice helps the device blend in with vehicle interiors or engine compartments. It is a standard aesthetic option that prioritizes a discreet look over decorative styling, ensuring the charger does not draw unnecessary attention when installed in your vehicle or RV setup.
Intended Use: RV
This specification confirms the device is designed specifically for recreational vehicles. It ensures compatibility with the electrical systems found in most RVs. You can trust that the charging logic is tailored to handle the specific battery types and voltage requirements typical of RV setups, providing a safe and reliable power source for your mobile living space.
Design and build details
The Anker SOLIX AS200 alternator charger is finished in black. According to the listing, the unit measures 8.59 inches in length, 4.69 inches in width, and 2.68 inches in height. These dimensions suggest a compact footprint that can fit into tight spaces under dashboards or in storage compartments of most vehicles. The small profile allows for discreet installation without taking up significant room.
The device is intended for use with gas vehicles and RVs. It features smart app control via Bluetooth and Wi-Fi connectivity. This layout means you do not need to reach for physical buttons to start or stop charging. You can manage the unit remotely from your phone, which is practical when the charger is mounted in an inaccessible location.
The package includes an installation board, fuse wire, and connection cables. This hardware supports a secure mount for the black unit. The design prioritizes easy integration into existing vehicle electrical systems. You can select your battery type in the app, and the charger adjusts automatically. This approach protects your battery while you drive, ensuring the build supports reliable, hands-off operation during travel.
Setup and everyday use details
The package includes the main charger, a PPS XT-60i port connection cable, a battery connection cable, a 100A fuse wire, an installation board, six screws, a quick start guide, and a safety card. You will need these components to connect the device to your vehicle’s battery and your power station. The listing notes compatibility with 99% of RVs and gas vehicles. It features automatic battery type selection to adjust charging parameters and protect your battery from damage. This automation simplifies the initial configuration for most users.
For daily operation, you can control the unit remotely via Bluetooth or Wi-Fi. The smart app allows you to start or stop charging sessions without leaving your seat. You can also switch between different charging modes and adjust power levels from your phone. This connectivity is useful for monitoring the process while you are parked or driving.
The charger supports ultrafast PPS charging and can recharge vehicle batteries efficiently. It claims to charge a 2kWh power station in three hours, which is up to eight times faster than using a standard car auxiliary port. You can also pair it with Anker SOLIX portable power stations and expansion batteries. For example, combining it with an F3000 and three expansion batteries provides an extra 12kWh of capacity. This setup lets you replenish energy while cruising, reducing downtime during your travels.
Before you buy this charger
You should verify your vehicle’s electrical system before installing this unit. The listing states compatibility with 99% of RVs and gas vehicles, but you must select the correct battery type in the app to prevent damage. Ensure your alternator can handle the load without draining your engine battery excessively. You will need the included 100A fuse wire and installation board for a secure setup. Check that your power station is an Anker SOLIX model, as this charger is designed for that ecosystem. If you plan to expand capacity, confirm your expansion batteries fit the system. Regularly inspect the connection cables for wear, especially if you drive on rough terrain. This device complements portable power stations by keeping them charged on the go. It does not replace a generator for high-draw appliances but serves as an efficient top-up source. Consider your typical trip length to determine if the 800W output meets your replenishment needs.
Check before you buy
- Confirm your vehicle is a gas RV or car.
- Check that your power station is an Anker SOLIX model.
- Verify your battery type settings in the app.
- Ensure you have space for the installation board.
- Inspect connection cables for damage before use.
Anker SOLIX 800W Alternator Charger
Best for: RV owners charging power stations while driving
- Connectivity
- Bluetooth, Wi-Fi
- Fuel Type
- Gas
- Intended Use
- RV
- Wattage
- 800W
- Dimensions
- 8.59 × 4.69 × 2.68 inches
The Anker SOLIX 800W Alternator Charger (AS200) charges power stations up to 8× faster than a car auxiliary port. It reaches 100% of a 2kWh unit in 3 hours. The device connects via Bluetooth or Wi-Fi for remote control. It fits 99% of RVs and gas vehicles. Its compact body measures 8.59 by 4.69 by 2.68 inches. This tool suits RV owners who want to recharge while driving.
- Charges a 2kWh power station to 100% in 3 hours
- Connects via Bluetooth and Wi-Fi for app control
- Compatible with 99% of RVs and gas vehicles
- Compact dimensions of 8.59 by 4.69 by 2.68 inches
- 800W wattage limits the maximum charging speed
- Requires specific installation hardware and cables
- You own an RV or gas vehicle
- You want to recharge your power station while driving
- You need remote control via a smartphone app
- You use a diesel vehicle without alternator charging support
- You need to charge multiple large power stations simultaneously
- You prefer a plug-and-play device without installation
Verdict: Anker SOLIX 800W Alternator Charger fits RV owners who want to recharge their power stations while driving. It offers fast charging and remote control for compatible gas vehicles and RVs.
Specifications side by side
| Spec | Anker SOLIX 800W Alternator Charger |
|---|---|
| Connectivity | Bluetooth, Wi-Fi |
| Fuel Type | Gas |
| Intended Use | RV |
| Wattage | 800W |
| Dimensions | 8.59 × 4.69 × 2.68 inches |
| Color | Black |
| Model | AS200 |
Frequently asked questions
Is the Anker SOLIX 800W Alternator Charger compatible with my RV?
Yes, the device is designed specifically for RV owners who need to recharge power stations while driving. The listing states it is compatible with 99% of RVs and gas vehicles. You must select the correct battery type in the companion app to ensure safe operation and prevent damage to your electrical system.
How fast does this charger replenish a power station?
It delivers 800W of charging power, which is significantly faster than standard auxiliary ports. This higher wattage helps replenish your battery more quickly during travel. The unit supports fast charging for compatible power stations, making it efficient for keeping your energy supply topped up on the road.
Can I control the charger remotely?
Yes, you can control the device remotely using Bluetooth and Wi-Fi connections. This feature allows you to monitor and adjust charging settings from a distance. It is particularly useful for gas vehicles and RVs where physical access to the unit might be inconvenient during a trip.
What is the size of the Anker SOLIX AS200?
The unit measures 8.59 inches in length, 4.69 inches in width, and 2.68 inches in height. It is finished in black and has a compact footprint. These dimensions suggest it can fit into tight spaces within your vehicle or RV setup without taking up excessive room.
What is included in the installation package?
The package contains the main charger, a PPS XT-60i port connection cable, a battery connection cable, a 100A fuse wire, an installation board, six screws, a quick start guide, and a safety card. You will need these components to properly connect and install the charger in your vehicle.
Does this charger work with gas vehicles?
Yes, the Anker SOLIX 800W Alternator Charger is compatible with gas vehicles. It is intended for use in RVs and standard gas-powered cars. The device connects to your vehicle’s alternator to generate power, allowing you to recharge your portable power station while the engine is running.
